Members Login
Username 
 
Password 
    Remember Me  
SignFreak! → SignFreak → Vutek → Vutek QS3200 error message "OVERFLOW IN CARRIAGE VACUUM CHAMBER CLEARED!"
 

Topic: Vutek QS3200 error message "OVERFLOW IN CARRIAGE VACUUM CHAMBER CLEARED!"

Post Info
Jim
Newbie
Status: Offline
Posts: 1
Date:
Vutek QS3200 error message "OVERFLOW IN CARRIAGE VACUUM CHAMBER CLEARED!"
Permalink  

The message appeared part way through printing, "OVERFLOW IN CARRIAGE VACUUM CHAMBER CLEARED!" the carriage then stopped and capped the heads the machine then started beeping. We cleaned the heads emptied the overflow and re-started the machine, it started printing but them stopped and did the same again. Can anybody help please!!



Attachments
__________________
Jim
gregwallace
Veteran Member
Status: Offline
Posts: 25
Date:
Permalink  
Have you checked the float sensor for the overflow reservoir? If it is down and still giving the error you should be able to disconnect the sensor. Just make sure the ink is not still backing up into the negative vacuum lines.


__________________
Chris S
Newbie
Status: Offline
Posts: 1
Date:
Permalink  
According to chapter 7 page 1 of the Service guide (if you don't have one there's a link below to dropbox pdf.) the most
common problem is the float sensor malfunctioning.
www.dropbox.com/sh/mnyj3cshmpatk6x/AAA99F49VqZKjpPrrVWPRDo_a

__________________
 
Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.
 
Tweet this page Post to Digg Post to Del.icio.us


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard